|
ITS
Telecom
CGW-I:
BRI to GSM Fixed Cellular Terminal
Cut your business
phone costs by connecting your ISDN telephone system directly to
GSM cellular networks.
The CGW-I is
a BRI (Basic Rate ISDN) to GSM Cellular Gateway that lets you call
cellular numbers from your ISDN telephone system, benefiting from
low business tariffs, bypassing your landline carrier and eliminating
interconnection fees.
The CGW-I is
your transparent and low cost solution for calls to GSM mobile phones:
- Fast ROI
(Return On Investment)
- Available
with 2 GSM channels
- Supports
worldwide GSM frequencies
|
Incoming
and Outgoing Call Features
Intelligent
Routing – Return up to 1,500 mobile calls directly
to the calling DDI (Direct Dial-In). CGW-I stores the link
between the dialing extension and the dialed cellular number.
When a missed mobile call is returned, CGW-I recognizes the
Caller ID and routes the caller to the dialer’s extension.
MSN
Routing – Route incoming cellular calls to
default Multi-Subscriber Number (MSN), such as a specific
extension, Automated Attendant or Voice Mail system.
Call
Barring – Dedicate your SIM to handle only
incoming calls, outgoing calls, or both.
Call
Diversion – Automatically reroute incoming
calls to an alternate channel when SIM is busy.
Toll
Restrictions – Define which cellular operator
prefixes to allow the CGW-I to call and which ones not to
allow.
Redirect
Calls – Override Toll Restrictions and set
up a cross-network connection.
Call
Duration – Limit the length of calls to protect
you from connections that are accidentally left open.
|
 |
System
Management & Monitoring
| Full
Device Control |
Configure
system parameters and view system status levels directly from
your PC with included user-friendly Windows-based utility program. |
| Alarms |
Set thresholds
to trigger selected SMS and Email alarms. |
| Statistics |
View Reception
Level and each SIM card’s accumulated traffic. |
| CDR |
Call Detail
Recording log for up to 2,500 records. |
| Balance
Call Distribution |
Evenly
distribute call traffic sent to each SIM. |
Configurable
Controls & Maintenance
| CLIP
/ CLIR |
Display
or hide SIM card numbers using Calling Line Identification Presentation/Restriction
setting. |
| SIM
PIN Control |
Protect
each SIM within the CGW-I from unauthorized use if removed. |
| Network
Lock |
Configure
your CGW-I to work permanently with only a specific operator. |
| Roaming |
Allow calls
to automatically connect to the strongest available signal or
restrict them to a specific network operator. |
| Dialing
Mode Support |
Overlap
or En Block. |
| End
of Dialing Digit |
Reduce
the time required to connect a dialed number. |
| Gain
Control |
Adjust
volume levels for both incoming and outgoing calls on each channel.
|
System
Specifications
| 2
Voice Channels: |
Each
with Integrated GSM Cellular Module |
| Indicator
LEDs: |
LAN Status
(Line and Active), Module Status (2) |
| Built-in
LCD: |
Verify
Signal Strength, Operational Status and Cellular Operator Name
to simplify maintenance. |
| ISDN
Protocol Support: |
EuroISDN
(Standard, In Bound DTMF Dialing, France, Germany), 1TR6 (Germany) |
| PBX
BRI Interfaces: |
NT/TE,
PtP/PtMP |
| Connectors: |
RS-232,
, LAN, ISDN Interface, SMA antenna (2), Sync In, Power supply |
| Frequency
Ranges: |
900/1800
MHz or 850/1900 MHz |
| SIM
Card: |
3V (Plug
in, Small) |
| Receiver
Sensitivity: |
-104dBm |
| Input: |
110VAC,
60Hz / 220VAC, 50Hz |
| Output: |
9VDC, 1.5Amp |
| Dimensions: |
(HxWxD)
– 21.5x4.3x18.5cm/8.47x1.69x7.28 inches |
| Weight |
: 0.96
kg / 2.12 lbs |
| Operating
Temperature |
: 00C-450C
/ 320F-1130F |
| Relative
Humidity: |
5-95% |
|
|
