Telecom
FM Cellroute GPRS - GSM Router - Technical Specification
Cellroute
Telephony Interface
- Call
Control DTMF
- Loop
Current 40mA off hook (20mA on mains fail)
- Line
impedance 600-ohm complex
- Ring
Voltage 70Vrms
- Ring
Load REN 4
- CLIP
Bellcore FSK
- Line
Voltage 48V on hook (36V on mains fail)
Cellroute
GSM Interface
- Bands
GSM 850MHz
- E-GSM
900MHz
- GSM
1800MHz
- GSM
1900MHz
- GSM
Phase 2+
- Transmit
Power Class 4 (2W) for E-GSM 900MHz
- Class
1 (1W) for GSM 1800MHz
- Speech
Codecs Half Rate (ETS 06.20)
- Full
Rate (ETS 06.10)
- Data
Rate Up to 85.6 kbps via GPRS
- SIM
Card 3V
- Antenna
Integral Omni directional Antenna with SMA connector for
external antenna option
Cellroute
Physical Interfaces
- Telephone
Analogue / RJ11 or BT603 option
- Data
Port RS232 / RJ45 with DB-9 converter
- GSM
Antenna Gold plated SMA male
- SIM
Card 3V Small card retained under rear panel
- Indication
2 x LED indication for battery / Transmission Status
- GSM
Antenna Gold plated SMA male
Cellroute
Approvals
- CE
Certification to R & TTE directive 1999/5/EC
- GSM
Certifications:
- ETS
300 607-1 Digital Cellular Telecommunications system
- EN
301 419-1 Global System for Mobile communication
- ETS
300 342-1 Radio Equipment and Systems
Cellroute
Power Supplies
- Primary
110-240Vac @ 47-63Hz
- Secondary
2 x A size NiMH rechargeable batteries with auto switch
over on mains failure
Cellroute
Features Overview
- High
Ringer Equivalence POTS Interface supports up to 4 additional
extension
- Highly
compatible POTS & PABX interface
- Integral
Battery Back-up
- Bellcore
Caller Line ID Presentation
- GSM
Network features supported (subject to network support)
- Selectable
Dial tone and Ring cadences
- RS232
Data port for emails/web and PC faxes
- SIM
lock
- Network
lock
- Remote
Software Upgrade
- Off-hook
howler
- External
Antenna facility
Cellroute
Physical Specification
- Height
150 mm
- Width
122 mm
- Depth
42 mm
- Weight
460gm
|
